Кипрский велочат без модерации.
@dimbosdimbosdimbos
@Shooorik_cy
@akarpinska
@vanyasvlА вот найти карбоновые кроссы на широкую ногу - похоже та еще задача
💬 ответы (14)
2023-03-21 07:54:36
@stepangudz
@Tikhonova_OlgaЧат, вдруг кто заинтересован приобрести недорого кроссовки? Пробег 6 км, стелька 26 см.
Мне не зашла модель
💬 ответы (3)
2023-03-21 07:49:13
@Vinitski
@MaratAkhmatnurov
@vanyasvlУ меня когда-то была велоформа Куб и мне очень нравилась )
💬 ответы (11)
2023-03-21 06:31:24
@f925e530На WW хорошая тема про выбор систем интегрированной проводки.
Вот неплохой расклад в одном комменте:
Deda DCR gets my vote. Nylon compression ring thats double depth compared to other systems. Its also undersized a little so you get a tight fit around the steerer and there is also a very secure way of preventing that ring from moving against the steerer. Also uses standard size bearings. Well used system for which I have heard of no failures too.
Token cable box system also seems pretty nice. No22 uses their system for internal routing. I know it also uses a composite spacer and I beleive, standard size bearings.
FSA ACR, I dont like because of the use of the alloy compression ring. It doesnt grip the steerer as tightly and the pin based retention system to prevent rotation against the steerer isnt as deep so seems more likely to move if there is minor loss of preload. It theoretically seems vulnerable to the same mode of failure as the Specialized system. However, in practice this is one of the most used systems and as far as I know has a very good track record. I dont mind routing through the top of the steerer, its a pain in the ass from a fit perspective but is also one less hose to fit into the head tube which is already a pretty tight space. Also, one less hole on the steerer.
Acros system used by Canyon and Focus is nice too with an extra seal and composite compression ring, but uses a special top bearing with a 42mm ID.
Chris King Aeroset / Enve. While i am sure you could make it compatible beyond enve with some 3D printing, no idea on bearing size and they are frighteningly expensive.
As far as OEM specific non-round systems, i think Look and the new Cannondale system seem ok; but would much rather stick with a round steerer since the above systems are all available.
https://weightweenies.starbike.com/forum/viewtopic.php?t=172271
Вот неплохой расклад в одном комменте:
Deda DCR gets my vote. Nylon compression ring thats double depth compared to other systems. Its also undersized a little so you get a tight fit around the steerer and there is also a very secure way of preventing that ring from moving against the steerer. Also uses standard size bearings. Well used system for which I have heard of no failures too.
Token cable box system also seems pretty nice. No22 uses their system for internal routing. I know it also uses a composite spacer and I beleive, standard size bearings.
FSA ACR, I dont like because of the use of the alloy compression ring. It doesnt grip the steerer as tightly and the pin based retention system to prevent rotation against the steerer isnt as deep so seems more likely to move if there is minor loss of preload. It theoretically seems vulnerable to the same mode of failure as the Specialized system. However, in practice this is one of the most used systems and as far as I know has a very good track record. I dont mind routing through the top of the steerer, its a pain in the ass from a fit perspective but is also one less hose to fit into the head tube which is already a pretty tight space. Also, one less hole on the steerer.
Acros system used by Canyon and Focus is nice too with an extra seal and composite compression ring, but uses a special top bearing with a 42mm ID.
Chris King Aeroset / Enve. While i am sure you could make it compatible beyond enve with some 3D printing, no idea on bearing size and they are frighteningly expensive.
As far as OEM specific non-round systems, i think Look and the new Cannondale system seem ok; but would much rather stick with a round steerer since the above systems are all available.
https://weightweenies.starbike.com/forum/viewtopic.php?t=172271
2023-03-21 05:28:50
@sWitched0ffсорян, посмотрел в логах, он другой ашан брал https://www.lombardobikes.com/en/bike/sestriere-500-2/
2023-03-20 21:14:49
@Tikhonova_OlgaВИжу на видео как @Shooorik1982 обгоняет слева….. айяйяй
💬 ответы (1)
2023-03-20 20:37:56